Installation instructions for the surface installation casing
The casing is made of untreated aspen and can be stained, varnished or painted. The casing has a hole for connecting cables at the bottom. If necessary, you can make a hole for the cable in another place using an 8 mm drill bit, for example.
- 1. Attach the casing with two (2) screws
- 2. Remove the embedding fl ange. Please note: embedding fl anges are not used with surface installation casings
- 3. Spread the glue on the gluing area in the outermost indentation
- 4. Bring the connecting cable out of the casing and press the heater control unit into position in the casing
- 5. Remove any excess glue using a cloth moistened with washing-up liquid.
The glue takes 24 hours to dry
Add your commentary